64 VW SUN MICRO BUS AS ARRIVED.

CUTTING OFF REAR SECTION

+

FITTED DIFFERENT REAR SECTION

CUTTING OUT RUSTED AREAS UNDER WINDOWS

BEGINNING TO WELD IN NEW STEEL, THEN POR-15 RUST PROOF AND PRIMER

BEGINNING TO START BODY WORK ON NEW AREAS

FRONT OF ROOF STARTING TO LOOK GOOD

DRIVER DOOR HOLES WELDED WITH NEW METAL

REAR CARGO AREA ABOVE ENGINE, BEING GROUND & WILL BE POR-15 AND PRIMED

ENGINE COMPARTMENT HAS BEEN GROUND DOWN & POR-15

James welding in new metal on inside of driver door

DRIVER SIDE ABOVE WHEEL NEW METAL HAS BEEN WELDED IN & POR-15

CARGO FLOOR BEING CUT OUT

THEN WIRE WHEEL TO REMOVE RUST, NOT YET FINISHED

AFTER RUST REMOVAL AND APPLICATION OF POR-15

AWAITING ARRIVAL OF PROPER CARGO FLOOR FOR WELDING IN

BELOW WE DRILL HOLES IN NOSE & USE A SLIDE PULL TO PULL DENTS & THEN HAND DOLLY SMOOTH

HOLES ARE WELDED UP AND FINAL HAND DOLLY & BODY WORK TAKE PLACE

HOLES WELDED, DENTS GONE, SANDED AND PRIMED